Oregon® Jet-Fit® bars allow harvester operators to change the bar and chain on their machines quickly, in about 30 seconds. In addition to the quick-change Jet-Fit® motor mount, solid-body Jet-Fit® bars offer all the durability, reliability, performance, and superior features of our Solid Harvester line of bars. Oregon® Jet-Fit® bars run heavy-duty .080"-gauge Oregon® 18H chain, and work on harvesters equipped with automatic and manual chain tensioners requiring a 15mm wide mounting slot.

Jet-Fit® Bars more info...
(requires Acrobat reader)

All new Oregon® solid harvester bars deliver superior performance. Computerized design techniques, state-of-the-art manufacturing processes and high-grade alloy-steel material are used. The patented Cradle™ sprocket-tooth design results in the critical nose-sprocket area being exceptionally strong and reliable. A newly painted bright yellow bar body comes in both .063 and .080 gauges. The .063 (red graphics) bar uses 16H saw chain and the .080 (black graphics) bar uses 18H saw chain.

The state of the art in 3/4"-pitch guide bars with rugged, solid-body construction and specialized alloy-steel material. 11H/BC bars are .122"gauge and can be restraightened if bent during cutting mishaps. . Available in either:

• Replaceable-sprocket-nose design. Superior cutting efficiency, maximum bar and chain life. The patented Cradle™ sprocket-tooth design results in the critical nose-sprocket area being exceptionally strong and reliable.
• Armor-tip design. Superior performance in abrasive cutting conditions. Ultra-tough wear resistant alloy is welded to the bar's nose.
  
  

One piece solid bar with double-ended motor mount design for slashers. Grooves are .122" for the application of 11H/BC chains. Three mounts are available:

• #135 will fit: FEC /HUDSON slashers
• #136 will fit: CTR slasher
• #137 will fit: SDK slasher
  
  

One piece solid bar for slashers having a motor mount at one end and an idler mount at the other end. Grooves are .122" for the application of 11H and 11BC chains.

More Info....
(requires Acrobat reader)

Built for full-time work in tough, abrasive conditions that would quickly ruin bearings of sprocket-nose bars. Oregon® Laser Tip Plus bars are mainly used on handheld saws, however, a few smaller harvester models, such as firewood processors, are intended for use with Laser Tip Plus bars.

• Ultra-high-strength wear resistant alloy is laser welded to the nose for long bar life
• Lubri-Dam® oil-retaining feature prevents oil from running out the bar's tail, keeps more oil on the bar and chain*
• Lubri Jet® oil holes reduce oil-hole plugging and enhance bar-chain lubrication*
• Laser welding provides the optimum wear resistant alloy bond without weakening the bar body, as can occur with gas welding

* Lubri-Dam® and Lubri Jet® oiling features may not be a standard feature on certain bars depending on the date of manufacture or bar type.

Ideal for pulpwood harvesting, commercial thinning, and logging. Features alloy-steel construction, slim contour, and replaceable nose-sprocket design. Oregon® Pro-Lite® bars are mainly used on handheld saws, however, a few smaller harvester models, such as firewood processors, are intended for use with Pro-Lite® bars.

• Made from silicon-alloy steel for high strength and light weight
• Slim contour, excellent maneuverability
• Replacement nose sprocket
• Patented Cradle™ nose sprocket design increases sprocket-nose life by 150% to 300%
• Lubri-Dam® oil-retaining feature increases oiling efficiency while reducing oil-hole plugging*

* Lubri-Dam® and LubriJet® oiling features may not be a standard feature on certain bars depending on the date of manufacture or bar type.